No-touch tubular handling · PSC-TG Series

PSC TubularGuider

Guide tubulars. Keep hands away from the load.

A hands-free push pull tool designed to guide, position and control suspended tubular loads from a selected working distance during rigging and handling operations.

Request a QuoteView Product Details
PSC TubularGuider push pull tool range in three lengths
3–5 ftThree working lengths
3Standard lengths
2Release methods
2Strap options
1Locking noose system
The challenge

Move the hand away from the tubular.

Swing and crush exposure

Unexpected pendulum motion can trap hands against racks, decks or adjacent structures.

Line-of-fire exposure

Direct hand guidance during landing puts workers close to shifting tubulars.

Final positioning

Pinch and crush exposure increases as the load approaches its intended position.

Surface hazards

Direct contact can expose hands to sharp edges, contamination and abrasion.

The TubularGuider system

Purpose-built tubular engagement.

Noose engagement end

Loop-and-noose design engages around the tubular outside diameter for push, pull and guiding operations.

Dual-action release

Spring-loaded cable release for planned disengagement and instant drop slide control for rapid emergency release, selected according to site protocol.

Positive locking mechanism

Maintains noose engagement during controlled push and pull operations.

Non-slip rubber grip

Textured grip designed for gloved operation in wet, oily or contaminated conditions.

High-impact polypropylene body

Lightweight, impact-resistant and corrosion-resistant body for industrial and offshore environments.

Aluminium shaft

Rigid shaft for controlled directional guidance, available in three lengths.

Two strap options

Nitrile for oil and chemical resistance in drilling and process environments; polypropylene for general industrial and construction applications.

Controlled engagement

Engage. Guide. Release.

01 / Engage

Select the correct tool length, engage the noose fully and confirm the lock.

02 / Guide

Apply controlled lateral push or pull force through the shaft while maintaining an appropriate working position.

03 / Release

Use the cable release for planned disengagement or the slide control for emergency release in accordance with site procedures.

Available lengths

Select the reach for your task.

PSC-TG-363 ft

Approx. 900 mm

Confined spaces and restricted working areas

PSC-TG-484 ft

Approx. 1200 mm

General-purpose tubular guiding and positioning

PSC-TG-605 ft

Approx. 1500 mm

Extended reach in open yards and rig floors

Technical overview

Specifications and part numbers.

Part numberLengthStrap materialRecommended use
PSC-TG-363 ft (approx. 900 mm)Nitrile / PolypropyleneConfined spaces and restricted working areas
PSC-TG-484 ft (approx. 1200 mm)Nitrile / PolypropyleneGeneral-purpose tubular guiding and positioning
PSC-TG-605 ft (approx. 1500 mm)Nitrile / PolypropyleneExtended reach in open yards and rig floors
BodyHigh-impact polypropylene
ShaftAluminium
GripNon-slip textured rubber
EngagementLooped noose with positive lock
ReleaseSpring-loaded cable and instant drop slide
Strap optionsNitrile / polypropylene
FunctionLateral push, pull and guiding of suspended tubulars
Applications

Tubular guidance across heavy industry.

Worker using PSC TubularGuider push pull tool to guide a suspended cylindrical industrial component

Typical applications

  • Grabbing and gripping suspended tubular components during rigging.
  • Guiding tubulars onto racks, platforms and pipe handling equipment.
  • Managing final positioning during landing.
  • Pulling suspended pipes into designated positions.
  • BOP hose and service line positioning.

Industries served

  • Oil and gas — offshore and onshore drilling and production
  • Industrial yards and fabrication facilities
  • Construction and civil infrastructure
  • Shipyards and ports
Safe use

Maintain separation. Verify engagement.

Inspect before use

Check the noose, strap, lock and release controls. Do not use damaged or deformed components.

Select the correct length

Match the required standoff to the task. Do not improvise extensions.

Confirm engagement

Engage the noose fully and verify the lock before applying push or pull force.

Select the release method

Use the slide control for emergency release and cable release for planned disengagement.

Stay clear of suspended loads

Never stand underneath a suspended load. The tool controls lateral movement only and cannot arrest a falling load.

Maintain communication

Coordinate with the crane operator or rigger throughout positioning.

Follow site procedures

Use the approved lift plan, tubular handling procedure and EHS protocols.

Guidance only — not a lifting device

The tool controls lateral movement only. Never use it to lift, support or arrest a falling load. Keep clear of the load path and follow approved site procedures.

Frequently asked questions

TubularGuider FAQs.

What is PSC TubularGuider?
A no-touch push/pull tool designed to guide and position suspended tubulars without direct hand contact.
What lengths are available?
3 ft, 4 ft and 5 ft, under part numbers PSC-TG-36, PSC-TG-48 and PSC-TG-60.
How does the tool engage a tubular?
The looped noose engages around the tubular outside diameter. Confirm engagement and locking before applying force.
What release mechanisms are provided?
A spring-loaded cable release for planned disengagement and an instant drop slide control for emergency release.
Which strap material should I select?
Nitrile is intended for oil and chemical resistance; polypropylene for general industrial and construction applications. Confirm suitability for the task.
Can it be used for hose positioning?
The datasheet lists BOP hose and service line positioning from an appropriate standoff.
Can the tool lift or support a suspended load?
No. It is for lateral guidance only and does not arrest a falling load.
What must be checked before use?
Inspect the noose, strap, lock and release controls, choose the correct length and follow site lift plans and safety procedures.
Resources

Choose the right TubularGuider for your task.

3 ft, 4 ft and 5 ft standard lengths
Nitrile and polypropylene strap options
Dual-action release and positive locking mechanism
Product resources

Datasheet & selection support

Contact PSC to confirm the appropriate length, strap and application suitability.

sales@pschandsafety.com
www.pschandsfree.com