Recovery After Landing
Workers may re-enter the exclusion area simply to recover a tagline after the load appears stable.
PSC TRT-3P Extendable combines two critical functions in one tool. Extend it to 12 ft to retrieve taglines, ropes and rigging cables from outside the immediate hazard zone, or collapse it to 6 ft for controlled pushing, pulling and final positioning of suitable suspended loads.
A tagline can swing away, drop beneath a load or land inside the fall zone. Manual recovery often requires a worker to approach suspended rigging, load edges and line-of-fire exposure after safe separation has already been maintained through the lift.
Workers may re-enter the exclusion area simply to recover a tagline after the load appears stable.
Taglines and rigging cables can settle beneath the load or beyond safe manual reach.
Bare hands, unsuitable poles and site-made hooks provide inconsistent grip and separation.
Separate positioning and retrieval tools slow the task and encourage workers to use whichever item is nearest.
TRT-3P extends for long-reach tagline retrieval and collapses into a full-size push/pull pole. Its fibreglass outer sleeve, aluminium inner pole and serrated aluminium head support controlled work across the active lift and recovery phases.
Use it extended for tagline retrieval and collapsed for suspended-load push/pull control.
A 6 ft collapsed configuration provides load-control reach, while the 12 ft extension supports remote retrieval.
Positively snags suitable taglines, ropes and rigging cables and also supports controlled push contact.
Provides a lightweight outer structure and the rigidity required for extended-reach handling.
Provides internal structural strength for retrieval and collapsed push/pull operations.
Replaces manual recovery and improvised hooks with a dedicated engineered interface.
TRT-3P changes configuration according to the task. The extended setting creates additional retrieval reach; the collapsed setting provides the rigidity and control required for suitable load manoeuvring.
Extend the tool before taking the retrieval position, confirm the lock and snag the line from outside the immediate fall zone.
Collapse the tool for controlled pushing, pulling and final positioning of suitable suspended loads.
Use the aluminium head to catch suitable ropes and taglines without direct hand contact near the load.
Use the 12 ft configuration for tagline retrieval and the collapsed 6 ft configuration for suitable suspended-load push/pull control.
Full-size push/pull configuration for suitable load guidance and final positioning.
Long-reach configuration for tagline, rope and rigging-cable retrieval.
PSC TRT-3P combines lightweight fibreglass outer construction with an aluminium inner pole and serrated head.
| Product | PSC TRT-3P Extendable Tagline Retriever & Push/Pull Tool |
|---|---|
| Part Number | PSC-TRT-3P |
| TRT Function | Tagline retrieval and rigging snagging |
| 3P Function | Push/pull pole for suitable suspended-load manoeuvring |
| Collapsed Length | 6 ft |
| Extended Length | 12 ft |
| Outer Construction | Lightweight fibreglass |
| Inner Pole | Aluminium |
| Head | Serrated aluminium head for positive snagging and push contact |
| Operating Environments | Offshore, onshore, industrial and drilling |
| Electrical Limitation | Not intended for use near energised power lines |
TRT-3P supports the retrieval phase at full extension and suitable load-control work in its collapsed configuration.
Recover taglines that have swung away, dropped under the load or landed beyond safe manual reach.
Snag suitable ropes and cables from inaccessible positions after load landing.
Guide and position suitable suspended loads during final approach and landing.
Apply controlled push or pull guidance through tight deck spaces and rigging areas.
Correct use depends on selecting the appropriate configuration before approaching the work area, confirming the extension is secure and maintaining the separation provided by the tool.
Set the required length and confirm the extension is secure before taking the retrieval position.
Do not approach the load while extending or adjusting the tool. Work from outside the immediate fall zone.
Engage the tagline or rope with the head instead of reaching past the tool and grabbing it by hand.
Use the 6 ft collapsed configuration for suitable suspended-load manoeuvring. Do not push or pull loads at full extension.
TRT-3P retrieves taglines; it does not replace approved tagline control during the active lift.
Inspect the head, outer sleeve, inner pole, joints and locking components. Remove a damaged tool from service.
TRT-3P contains an aluminium internal pole and aluminium head. Do not use it near energised power lines or live electrical exposure.
Key function, configuration and safe-use questions about PSC TRT-3P Extendable.
Access technical information or contact PSC for help applying the correct TRT-3P configuration to your tagline-retrieval and suspended-load operation.
Download the PSC TRT-3P datasheet for specifications, operating configurations, applications and safe-use guidance, or contact PSC for product-selection support.