S-Head
Standard profile for general guidance and positioning.
PSC Load-It® is an interchangeable-head aluminium push/pull safety tool engineered for hands-off guiding, manoeuvring, positioning and stabilising of suspended loads from a controlled standoff position. Six standard head profiles and six tool lengths allow the working configuration to be matched to the load geometry, task and required separation distance.

Direct hand guidance can place workers close to changing load edges, sling points, rigging hardware, pinch zones and possible load movement. Load-It® provides a rigid interface so suitable push and pull force can be applied from a defined working distance.
Suspended loads can swing, rotate or shift during final positioning and landing.
Load corners, rigging hardware and landing interfaces can create changing hand hazards.
Direct contact places personnel closer to the load's possible movement path.
Load-It® places a rigid working buffer between the operator and the load.
PSC Load-It® combines a rigid marine-grade aluminium shaft with task-specific head profiles and selectable tool lengths. The system is built around a simple objective: guide and position suitable loads without making the operator's hands the point of contact.
S, M, J, T, L and Angled profiles provide different engagement geometries for general guidance, hooking and structural positioning.
A lightweight rigid shaft provides controlled interaction with the load while keeping overall tool weight manageable.
The high-visibility finish improves identification of the tool in busy industrial, yard, drilling and deck environments.
Select the working distance to suit confined positioning, intermediate reach or extended standoff requirements.
The optional D-handle provides an alternative grip arrangement and additional wrist control for selected push and pull operations.
F-Head, Scrapper Head, Shovel Head, Wedge Head and bespoke configurations can be discussed where a standard profile does not suit the task.
Load-It® is not limited to one working profile. The standard head family allows the tool to be configured around how the operator needs to guide, push, pull, hook or engage the load.
Profiles intended for controlled contact with suitable flat surfaces, edges and load structures.
Selected profiles provide geometry for snagging or pulling compatible rigging and load features.
Task-specific profiles can interface with suitable beams, frames and other industrial load geometry.
Six standard profiles provide different engagement geometries. Select the configuration according to the load shape, contact point and intended push, pull, hooking or positioning task.
Standard profile for general guidance and positioning.
General guidance configuration for suitable engagement tasks.
Hooking and retrieval configuration for selected rigging operations.
Task-specific profile for structural engagement.
Structural engagement configuration for selected positioning tasks.
Offset engagement profile for application-specific contact.
Match the tool length to the operating environment, load geometry, access constraints and required physical separation.
Confined positioning
Compact standoff
Intermediate reach
Extended standoff
Long-distance control
Maximum standard length
PSC Load-It® is intended for guiding, manoeuvring, positioning and stabilising suitable loads. It is not presented as a lifting, load-bearing, levering or prying tool.
| Product Series | PSC-LIT Series |
|---|---|
| Shaft Material | Marine-grade aluminium |
| Finish | Safety-yellow powder coat |
| Standard Heads | S, M, J, T, L and Angled |
| Custom Head Options | F-Head, Scrapper Head, Shovel Head, Wedge Head and bespoke configurations |
| Length Options | 2, 4, 6, 8, 10 and 12 ft |
| Weight Range | 630 g – 2.67 kg |
| Handle | Standard grip or optional D-Handle |
| Visibility | High-Viz safety yellow |
| Primary Function | Guiding, manoeuvring, positioning and stabilising |
| Operating Environments | Offshore, onshore, steel, drilling and heavy industrial |
Six standard head families across six standard tool lengths.
| Length | S-Head | M-Head | J-Head | T-Head | L-Head | Angled | Weight |
|---|---|---|---|---|---|---|---|
| 2 FT | PSC-LIT-S002 | PSC-LIT-M002 | PSC-LIT-J002 | PSC-LIT-T002 | PSC-LIT-L002 | PSC-LIT-A002 | 630 g |
| 4 FT | PSC-LIT-S004 | PSC-LIT-M004 | PSC-LIT-J004 | PSC-LIT-T004 | PSC-LIT-L004 | PSC-LIT-A004 | 1.05 kg |
| 6 FT | PSC-LIT-S006 | PSC-LIT-M006 | PSC-LIT-J006 | PSC-LIT-T006 | PSC-LIT-L006 | PSC-LIT-A006 | 1.46 kg |
| 8 FT | PSC-LIT-S008 | PSC-LIT-M008 | PSC-LIT-J008 | PSC-LIT-T008 | PSC-LIT-L008 | PSC-LIT-A008 | 1.84 kg |
| 10 FT | PSC-LIT-S010 | PSC-LIT-M010 | PSC-LIT-J010 | PSC-LIT-T010 | PSC-LIT-L010 | PSC-LIT-A010 | 2.25 kg |
| 12 FT | PSC-LIT-S012 | PSC-LIT-M012 | PSC-LIT-J012 | PSC-LIT-T012 | PSC-LIT-L012 | PSC-LIT-A012 | 2.67 kg |
For J, T, L and Angled head availability and current lead times, contact PSC before ordering.
PSC Load-It® supports suitable tasks where controlled pushing, pulling, hooking or positioning is required while maintaining physical separation from the immediate load hazard zone.
Guide and stabilise suitable suspended loads during final approach, alignment and landing.
Use suitable head profiles to engage compatible taglines, slings or rigging features from a controlled position.
Assist with positioning of suitable suspended plates, billets, beams and fabricated components.
Support alignment of suitable structural beams and components during crane-assisted placement.
Guide suitable drill pipe, tubulars and pipe sections during controlled crane-assisted positioning.
Use the selected configuration for suitable deck, platform, shipyard and heavy-industrial load-control tasks.
Correct use depends on matching the head and length to the task, preserving the working distance created by the tool and keeping Load-It® within its intended guidance and positioning functions.
Match the engagement profile to the load geometry and intended push, pull, hook or positioning task.
Choose a suitable tool length according to available space, load geometry and required standoff.
Two tools can provide coordinated bilateral positioning control where the lift plan and task allow it.
Load-It® complements required tagline control practices; it should not be positioned as replacing approved tagline use.
Apply the tool during suitable final approach, descent, alignment and placement operations.
Preserve the physical separation created by the selected tool length instead of reaching past the tool.
PSC Load-It® is intended for guiding, manoeuvring, positioning and stabilising suitable loads. It must not be used to support a suspended load's weight or as a lifting, levering or prying device. Do not use during crane hoisting or long-travel lifting phases. Follow the approved lift plan and keep outside the load hazard zone.
The optional D-handle provides an alternative grip arrangement for operators who prefer additional wrist control during sustained push or pull operations. The standard grip remains available for applications where a simpler straight-handle configuration is preferred.
Provides another hand orientation for sustained controlled force.
Supports secure handling during suitable industrial operations.
Watch PSC Load-It® in use to see how the push/pull safety tool helps operators guide, position and control suitable suspended loads while maintaining physical separation from the load.
Watch Product Demonstration →Key product, selection and safe-use questions about the PSC Load-It® Push Pull Safety Tool.
Use the technical information on this page or contact PSC for support selecting the appropriate head profile, tool length and grip configuration for your suspended-load application.
Review the complete technical specifications and part-number matrix above, or contact PSC for configuration support based on your load geometry, working environment and required standoff.