Pinch and crush zones
Direct hand guidance exposes fingers to unexpected load movement.
Guide, align and position suitable ferrous suspended loads from an appropriate standoff. Choose fixed-length or extendable configurations to match the task.

Direct hand guidance exposes fingers to unexpected load movement.
Structural loads may require reaching across edges and rigging.
Suspended equipment can drift or rotate during descent.
Repositioning before rigging is cleared can expose hands to the load.
Neodymium magnetic engagement for suitable ferrous surfaces. Confirm attachment before movement.
Self-aligning head on MG001–MG004 and MAG-FG-008 for suitable angled or curved surfaces.
Fixed engagement geometry on MG006 and MG008 for appropriate structural profiles.
Adjust and lock the telescopic shaft at the selected length before applying force.
Datasheet specifies aluminium construction with safety-yellow powder coat.
Standard rubber grip or optional D-handle for alternative grip orientation.
Select the tool configuration for the load geometry, contact surface and required working distance.
Rated magnetic pull force for the fixed series. Six listed lengths from 1 to 8 ft, with custom lengths up to 12 ft on request.

Rated magnetic force at full extension. Adjustable 4–8 ft reach with a 180° swivel head.
Magnetic force is not a lifting capacity. The product-range image is illustrative; refer to the part-number matrix for listed configurations.
| Part number | Length | Head type | Weight | Magnetic force |
|---|---|---|---|---|
| PSC-LIT-MG001 | 1 ft | 180° swivel | ~1.1 kg | 550 lb |
| PSC-LIT-MG002 | 2 ft | 180° swivel | 1.4 kg | 550 lb |
| PSC-LIT-MG003 | 3 ft | 180° swivel | ~1.6 kg | 550 lb |
| PSC-LIT-MG004 | 4 ft | 180° swivel | 1.7 kg | 550 lb |
| PSC-LIT-MG006 | 6 ft | 90° fixed | 2.0 kg | 550 lb |
| PSC-LIT-MG008 | 8 ft | 90° fixed | 2.5 kg | 550 lb |
| PSC-LIT-MAG-FG-008 | 4–8 ft | 180° swivel | Not stated | 275 lb |
Magnetic force is not a lifting capacity. The datasheet matrix includes 1 ft and 3 ft models, although its summary lists 2–8 ft. Approximate weights are marked ~. Extendable weight is not specified.
| Shaft material | Lightweight aluminium (as stated in datasheet) |
|---|---|
| Finish | Safety yellow powder coat |
| Handle | Rubber grip or optional D-handle |
| Load compatibility | Suitable ferrous surfaces |
| Custom lengths | Up to 12 ft on request; datasheet states 3.5 kg at 12 ft |
| Environment | Heavy industrial, steel, offshore and fabrication |

For guidance and positioning of suitable ferrous loads where a selected fixed working length matches the task.

For applications requiring a variable working distance. Select and lock the shaft before use.
Steel plates, beams, castings, motors, C-hooks and coil lifters.
Directional guidance, final positioning, lifting beams and spreader bars.
Valves, flanges, pipe assemblies, equipment modules and heavy machinery with suitable ferrous contact surfaces.
Steel mills, fabrication yards, oil and gas plants, offshore platforms, shipyards and structural steel construction.
Confirm secure attachment to the suitable ferrous surface before movement or lateral force.
Select a working length that keeps personnel outside the load swing radius.
Confirm the telescopic shaft is fully locked at the selected extension.
MagHead complements approved taglines; it does not replace them.
Do not use the tool to lift or support loads. Magnetic force is not a safe working load. Follow the approved lifting plan, risk assessment and manufacturer instructions.
Contact PSC to confirm the model and suitability for your application.