PSC Lift Assist · Manual Lifting Aids

PSC Lift Assist

Lift with Better Posture. Keep Hands Clear of the Load.

PSC Lift Assist sling-type aids help operators lift, carry and manoeuvre suitable pipes, valves, tubing and smaller industrial components with less bending and less direct hand contact.

Request a QuoteView Product Details
PSC Lift Assist single handle, double handle and choke valve sling range
50–100 kgModel-specific equipment WLL
75 kgSingle Handle WLL
100 kgDouble Handle WLL
50 kgChoke Valve WLL
3task-specific variants
The Challenge

Small heavy components can force workers into awkward, hand-intensive lifting.

Direct handling of pipes, valves and equipment can increase bending, back and arm strain, and exposure to pinch, crush and caught-between points.

01

Repeated Bending

Low-level lifting and carrying can place repeated strain on the back and arms.

02

Direct Hand Contact

Hands wrapped around equipment remain exposed to sharp edges and unstable movement.

03

Pinch and Crush Points

Setting down or repositioning components can trap fingers between the load and nearby surfaces.

04

Poor Balance

Irregular components can be difficult to grip and carry with stable posture and control.

The Solution

A controlled sling connection between the operator and the load.

Lift Assist provides dedicated handles for lifting and carrying suitable components with improved posture, less bending and reduced direct hand contact.

01

Improved Lifting Ergonomics

Reduces unnecessary bending and supports a more upright handling posture.

02

Less Direct Hand Contact

Dedicated handles help keep hands away from the load and its immediate pinch points.

03

Three Variants

Single Handle, Double Handle and Choke Valve models address different tasks and capacities.

04

Lightweight Sling Design

Easy to carry, position and integrate into routine manual-handling work.

05

Improved Balance

Supports controlled lifting and carrying of suitable pipes, valves and equipment.

06

Model-Specific WLL

Each model provides a clearly defined working-load limit that must not be exceeded.

Model Selection

Match the sling configuration to the load and task.

Select the correct model according to load weight, shape, balance, connection method and the approved handling plan.

Single Handle

Compact 75 kg WLL sling for suitable single-operator handling tasks.

Double Handle

Longer 100 kg WLL sling supporting balanced handling through two dedicated grips.

Choke Valve Model

Purpose-oriented 50 kg WLL sling for suitable valves and similarly shaped components.

Available Variants

Three configurations for different lifting needs.

Working-load limit, sling width and sling length vary by model. Never substitute one model’s rating for another.

PSC-SH-100

Single Handle

75 kg WLL

50 mm × 900 mm

Suitable single-operator tasks, subject to manual-handling assessment.

Enquire about this model →
PSC-CV

Choke Valve

50 kg WLL

25 mm wide · length not specified

For suitable choke valves and similar valve body profiles.

Enquire about this model →

PSC-SH-100 and PSC-SH-75 refer to the same product according to the datasheet. WLL is an equipment rating, not an individual lifting allowance.

Technical Overview

Model-specific ratings. Controlled manual lifting.

Choose and use each Lift Assist model according to its stated WLL, dimensions and intended application.

Product RangePSC Lift Assist Manual Lifting Aids
Single HandlePSC-SH-100 · 75 kg WLL · 50 mm × 900 mm
Double HandlePSC-DH-100 · 100 kg WLL · 50 mm × 1500 mm
Choke ValvePSC-CV · 50 kg WLL · 25 mm wide · length not specified
ConstructionLightweight sling-type lifting aid with dedicated handle or handles
ApplicationsPipes, tubing, valves, pup joints, fishing tools, ironwork and suitable deck cargo
IndustriesOil and gas, rigging, construction, offshore, onshore and industrial maintenance
Primary BenefitLess bending and reduced direct hand contact during suitable manual lifts
Critical RequirementDo not exceed the model-specific WLL
Applications

Built for smaller heavy components that are difficult to grip safely.

Lift Assist supports suitable manual handling across oil and gas, construction, rigging and industrial maintenance.

Application 01

Pipe & Tubing

Lift and carry suitable pipe sections and tubing with less bending and direct gripping.

Application 02

Valves & Oilfield Equipment

Handle suitable choke valves, pup joints and fishing tools within the applicable WLL.

Application 03

Ironwork & Construction

Support controlled handling of smaller ironwork and compatible construction components.

Application 04

Rig & Deck Cargo

Assist with suitable smaller equipment during offshore, onshore and rigging operations.

PSC Lift Assist sling supporting a valve component
The Hands-Off Approach

Respect the WLL. Control the full lifting path.

Correct use requires model selection, pre-use inspection, trained operators, stable lifting conditions and a planned path clear of pinch points. The WLL is not a permissible individual lifting weight; assess load, posture, frequency, route and operator capability, and use mechanical assistance when required.

01 — Select the Correct Model

Match the sling type, dimensions and WLL to the load and approved task plan.

02 — Inspect Before Use

Check sling webbing, stitching, handles and connection areas for wear or damage.

03 — Secure and Balance the Load

Confirm stable sling placement and load balance before lifting or carrying.

04 — Maintain Clear Hands

Use the handles and keep fingers away from the load, landing surface and caught-between points.

05 — Use Trained Operators

Follow the risk assessment, manual-handling plan and site lifting procedure.

06 — Control the Route

Avoid unstable conditions and keep personnel clear of the load's movement path.

!

Never Exceed the Working Load Limit

Never exceed the exact model’s WLL. Remove damaged or worn slings from service. WLL does not establish a safe manual lifting weight or eliminate dropped-load hazards.

FAQs

Frequently Asked Questions

Key model, capacity, application and safe-use questions about PSC Lift Assist.

What is PSC Lift Assist?
It is a range of sling-type manual lifting aids for handling suitable smaller industrial loads with less bending and direct hand contact.
Which models are available?
PSC-SH-100 Single Handle, PSC-DH-100 Double Handle and PSC-CV Choke Valve models.
What are the working load limits?
75 kg for PSC-SH-100, 100 kg for PSC-DH-100 and 50 kg for PSC-CV. Never exceed the rating of the selected model.
What loads can it help handle?
Applications can include suitable pipe, tubing, valves, pup joints, fishing tools, ironwork and smaller deck cargo, subject to the task plan and model rating.
Does it replace mechanical lifting equipment?
No. Use mechanical lifting equipment whenever the load, conditions, risk assessment or site procedure requires it.
How does it support ergonomics?
Dedicated handles can reduce bending, improve posture and lessen direct gripping of the load.
What must be inspected before use?
Check webbing, stitching, handles and connection areas for cuts, wear, contamination, deformation or other damage.
What is the safest way to use it?
Choose the correct model, secure and balance the load, keep hands clear of pinch points, control the path and follow the approved manual-handling procedure.
PSC Lift Assist Resources

Get the product information you need.

Access technical information or contact PSC for help selecting a Lift Assist model for your manual-handling task.

Three task-specific sling configurations
Model-specific WLL from 50 to 100 kg
Less bending and improved handling posture
Reduced direct hand contact with suitable loads
Product Resources

Datasheet or direct quotation request.

Download the PSC Lift Assist datasheet for model capacities, dimensions, applications and safe-use guidance, or contact PSC for support.

sales@pschandsafety.com
www.pschandsfree.com