PSC-GIT Series · Hands-Free Suspended Load Control

PSC Guide-It® Push Pull Safety Tool

Guide the Load. Keep Hands & Feet Clear.

PSC Guide-It® is an ultra-lightweight heavy-duty push/pull safety tool designed to help operators push, pull, guide, spot and stabilise suspended loads, drill pipes, tubulars and rigging while maintaining physical separation from pinch points, crush zones and hazardous load movement.

View Product Details
PSC Guide-It complete yellow push pull safety tool on a dark studio background
<2 kgUltra-lightweight complete tool
<2kg complete tool weight
200kg push rating
100kg pull rating
5standard tool lengths
The Challenge

Final load positioning can bring workers into the highest-exposure zone.

During landing, spotting, tubular handling and rigging adjustment, suspended loads can shift, swing, rotate or roll. Direct hand or foot contact places workers close to pinch points, crush zones, sling points and the load swing arc.

01

Pinch & Crush Exposure

Hands around load corners, sling points and landing areas can be trapped if the load moves during final positioning.

02

Hands & Feet Near Tubulars

Rolling pipe, casing and other cylindrical loads can expose hands, feet and legs during rack and lay-down operations.

03

Load Swing Arc

Adjusting slings or taglines close to a suspended load can move workers into the path of unexpected load movement.

04

Controlled Working Distance

Guide-It® provides a physical interface so push, pull and guidance forces can be applied through the tool rather than directly by hand.

The Solution

PSC Guide-It® Push/Pull Safety Tool

Guide-It® is designed to become the operator's physical interface with suitable suspended loads during final positioning. Its lightweight fiberglass construction, nylon engagement head and guarded D-handle combine working distance with controlled push and pull capability.

01

Ultra-Lightweight Construction

The complete Guide-It® weighs under 2 kg, supporting single-handed operation and helping reduce fatigue during repetitive positioning work.

02

Heavy-Duty Nylon Engagement Head

Designed to engage suitable load corners, sling points, rigging frames, drill pipe bodies and taglines for controlled push and pull operations.

03

High-Strength Fiberglass Body

Provides the rigidity required for controlled positioning while maintaining low tool weight and resistance to corrosion, drilling fluids, seawater and wash-down environments.

04

Ergonomic Non-Slip D-Handle

Provides a stable grip with gloved hands, including wet and oily working conditions, under both push and pull loads.

05

Integrated Hand Guard

The fixed guard helps prevent the operator's hand from sliding toward the engagement area during forceful manoeuvres.

06

200 kg Push / 100 kg Pull Rating

Rated for demanding industrial positioning and load-control tasks while remaining under 2 kg complete tool weight.

Push, Pull & Retrieval Control

One working head. Multiple load-control tasks.

The heavy-duty nylon engagement head is designed to provide controlled contact with suitable loads and rigging components while the operator remains at the selected standoff distance.

Push Loading

Apply controlled forward pressure to guide and position suitable suspended loads during final approach and landing.

Pull Guidance

Apply backward tension through suitable engagement to steer, align and reposition loads without direct hand contact.

Tagline & Rigging Retrieval

Use the head geometry for suitable tagline snagging, retrieval and selected sling or lifting-point adjustment tasks from outside the immediate hazard zone.

Five Standard Lengths

Select the standoff distance required for the task.

Choose the Guide-It® length according to lift height, deck geometry, load configuration, available working space and the separation required during final positioning.

21”PSC-GIT-21

Compact configuration for suitable short-reach or confined positioning tasks.

42”PSC-GIT-42

Short-to-medium reach for general industrial load-control work.

50”PSC-GIT-50

Mid-length configuration for general suspended-load and tubular handling.

72”PSC-GIT-72

Extended working distance for suitable taller picks and open work areas.

96”PSC-GIT-96

Longest standard Guide-It® configuration for extended-reach positioning tasks.

Technical Overview

Ultra-lightweight construction. Rated industrial control.

Guide-It® combines a sub-2 kg complete tool weight with rated push and pull performance for suspended-load, tubular and rigging-related positioning tasks.

ProductPSC Guide-It® Push/Pull Safety Tool
Product SeriesPSC-GIT Series
Primary FunctionPushing, pulling, guiding, spotting and stabilising suitable suspended loads
Complete Tool WeightUnder 2 kg
Body MaterialHigh-strength fiberglass
Head MaterialHeavy-duty nylon
Push Rating200 kg
Pull Rating100 kg
HandleErgonomic non-slip D-handle
Hand GuardIntegrated
FinishYellow / white — high visibility
Available Lengths21”, 42”, 50”, 72”, 96”
Part NumbersPSC-GIT-21, PSC-GIT-42, PSC-GIT-50, PSC-GIT-72, PSC-GIT-96
Operating EnvironmentsOffshore, onshore, heavy industrial and drilling
ResistanceCorrosion, drilling fluids, seawater and wash-down
Worker using PSC Guide-It push pull tool to guide a suspended steel beam in an industrial facility
Applications

Built for final positioning, tubular handling and rigging support.

PSC Guide-It® supports suitable industrial tasks where controlled pushing, pulling, spotting or retrieval is required while keeping hands and feet away from the immediate load hazard zone.

Application 01

Suspended Load Positioning

Push, pull, spot and steady suitable suspended loads during the final metre of descent, alignment and landing.

Application 02

Drill Pipe & Tubular Handling

Manoeuvre drill pipe, casing, tubular strings and related components during suitable rack, platform, pick-up and lay-down operations.

Application 03

Rigging & Tagline Retrieval

Snag and retrieve suitable taglines after landing and assist selected sling or lifting-point adjustment tasks without approaching the load unnecessarily.

Application 04

Coordinated Two-Sided Control

Where appropriate, one Guide-It® on each side of the load can support coordinated bilateral control during final landing and positioning.

The Hands-Off Approach

Maintain the standoff. Let the tool make contact.

Guide-It® is a positioning and guidance tool. Correct use depends on selecting the appropriate length, maintaining the separation provided by the tool and using it only for its intended load-control functions.

01 — Engage During Final Approach

Use Guide-It® during suitable final descent, spotting and placement tasks rather than during crane hoist or long-travel movement.

02 — Maintain Standoff Distance

Do not close the gap between operator and load while using the tool. The selected tool length establishes the intended working separation.

03 — Guide Through the Tool

Apply the required push, pull or directional guidance through Guide-It® instead of reaching past it and touching the suspended load.

04 — Use in Pairs Where Appropriate

One Guide-It® on each side can support coordinated two-sided control during suitable landing and positioning tasks.

05 — Continue Approved Tagline Control

Guide-It® complements approved taglines; it does not replace them. Maintain appropriate tagline control throughout the lifting cycle.

06 — Select the Correct Length

Match the tool length to lift height, load geometry, available space and the required standoff distance.

!

Not Rated for Lifting, Prying or Levering

PSC Guide-It® is designed for guiding and stabilising suitable loads. It must not be used for load bearing, lifting, supporting loads, prying or levering.

FAQs

Frequently Asked Questions

Key product, selection and safe-use questions about the PSC Guide-It® Push/Pull Safety Tool.

What is PSC Guide-It®?
PSC Guide-It® is an ultra-lightweight heavy-duty push/pull safety tool designed for hands-free pushing, pulling, guiding, spotting and stabilising of suitable suspended loads. It can also assist with tubular handling, sling adjustment and tagline retrieval.
How much does PSC Guide-It® weigh?
The complete PSC Guide-It® push pull tool weighs under 2 kg.
What are the PSC Guide-It® push and pull ratings?
PSC Guide-It® is rated for 200 kg push loading and 100 kg pull loading.
What lengths are available for PSC Guide-It®?
PSC Guide-It® is available in 21, 42, 50, 72 and 96 inch lengths.
What are the PSC Guide-It® part numbers?
The part numbers are PSC-GIT-21, PSC-GIT-42, PSC-GIT-50, PSC-GIT-72 and PSC-GIT-96.
Can PSC Guide-It® be used for drill pipe and tubular handling?
Yes. Guide-It® can assist with controlled manoeuvring and positioning of drill pipe, casing, tubulars and related components during suitable crane-assisted handling tasks.
Does PSC Guide-It® replace an approved tagline?
No. Guide-It® is intended to complement approved taglines. Appropriate tagline control should continue throughout the lifting cycle.
Can PSC Guide-It® be used for lifting, prying or levering?
No. Guide-It® is designed for guiding and stabilising loads and must not be used for load bearing, lifting, supporting loads, prying or levering.
Guide-It® Resources

Get the product information you need.

Access Guide-It® technical information or contact PSC for help selecting the appropriate tool length for your suspended-load, tubular or rigging application.

Complete tool weight under 2 kg
200 kg push rating · 100 kg pull rating
Five standard lengths from 21” to 96”
Fiberglass body · heavy-duty nylon engagement head
Product Resources

Datasheet or direct quotation request.

Download the PSC Guide-It® datasheet for product specifications, sizes, part numbers, applications and best-practice guidance, or contact PSC for product-selection support.

sales@pschandsafety.com
www.pschandsfree.com