Slippage & Tip-Over
Smooth cylindrical surfaces offer limited hand purchase, increasing the possibility of losing control during movement.
PSC GasGrab™ is a lightweight manual handling aid designed to help operators lift, reposition and move compatible gas cylinders using ergonomic handles instead of directly gripping the cylinder body. Its die-cast aluminium construction, rubber lining and warm-touch coating support secure, comfortable handling.

Heavy, smooth and top-heavy cylinders can slip, tip or roll during manual handling. Direct gripping can also bring hands close to valves, fittings and hot or cold cylinder surfaces while repeated movement creates awkward strain.
Smooth cylindrical surfaces offer limited hand purchase, increasing the possibility of losing control during movement.
Improvised grips may place hands close to high-pressure valves, guards and fittings that should not be used as lifting points.
Sun-exposed or cold-stored cylinders can create uncomfortable or hazardous direct metal contact.
Repeated handling without a defined grip can contribute to awkward wrist, shoulder and back positioning.
The tool is designed to secure around a correctly matched cylinder body. The operator uses the ergonomic handles while the rubber-lined aluminium frame provides the contact surface.
Combines structural durability with a complete tool weight under 2 kg for practical manual handling.
Helps grip the cylinder body while protecting compatible painted surfaces from direct metal contact.
Provides a more comfortable hand interface and helps limit direct contact with hot or cold metal surfaces.
Creates a defined gripping position intended to support more controlled posture during compatible cylinder movement.
Available in 215, 230, 235, 254 and 267 mm configurations for correctly matched cylinder bodies.
Low tool weight supports manoeuvrability and helps minimise the additional load introduced by the handling aid.
GasGrab combines a rigid lightweight frame with a protective lining and coated handles so compatible cylinders can be handled through the tool rather than by wrapping hands around the cylinder body.
The rubber-lined frame is intended to seat around the correctly sized cylinder and provide a stable gripping interface.
The lining separates the aluminium body from the cylinder surface to help reduce scratching and direct metal-to-metal contact.
Warm-touch handles provide a defined grip and help reduce exposure to cylinder surface-temperature extremes.
Correct size selection is essential to obtain the intended clamp fit and stability. Confirm the cylinder’s measured outside diameter before ordering and before use.
For compatible cylinders matching the specified 215 mm tool size.
For compatible cylinders matching the specified 230 mm tool size.
For compatible cylinders matching the specified 235 mm tool size.
For compatible cylinders matching the specified 254 mm tool size.
For compatible cylinders matching the specified 267 mm tool size.
The published specification identifies a die-cast aluminium body, rubber lining, warm-touch coating, under-2 kg weight and five available size options.
| Product | PSC GasGrab™ Gas Cylinder Handling Tool |
|---|---|
| Part Number | PSC-GG |
| Primary Function | Manual lifting, repositioning and transport of correctly matched gas cylinders |
| Tool Weight | Under 2 kg |
| Body Material | Die-cast aluminium |
| Lining | Rubber - grip and cylinder-surface protection |
| Handle Coating | Warm-touch |
| Available Sizes | 215, 230, 235, 254 and 267 mm |
| Operator Interface | Ergonomic handles |
| Typical Environments | Oil and gas, offshore, healthcare, welding, fabrication, construction and general industry |
| Use Classification | Manual handling aid |
| Overhead Lifting | Not rated or permitted |

PSC GasGrab supports suitable manual handling tasks wherever correctly sized gas cylinders need to be lifted, repositioned or transported under an approved handling procedure.
Handling compatible welding, cutting and process-gas cylinders around approved plant, workshop and deck locations.
Supporting controlled manual movement of compatible oxygen and medical-gas cylinders within approved facility procedures.
Repositioning compatible high-pressure cylinders used for welding, cutting and general engineering operations.
Moving compatible cylinders used in construction, catering, LPG, CO₂, events and other repeated-handling environments.
A cylinder-handling example using the tool’s designated handles. Follow the approved procedure for correct sizing, placement, grip verification, manual movement and release.
GasGrab is a manual handling aid. Safe use depends on correct size selection, pre-use inspection, secure seating and compliance with the cylinder supplier’s handling instructions and site procedure.
Match the selected GasGrab size to the cylinder diameter. Do not use an ill-fitting tool.
Check the aluminium body, handles, rubber lining, coating and clamp mechanism. Remove damaged equipment from service.
Confirm that the frame and lining are firmly seated around the cylinder before applying lifting force.
Use the designated handles rather than reaching around the tool to grip the cylinder body or valve area.
Keep the appropriate valve-protection cap fitted during transport and never lift a cylinder by its valve or fittings.
Use suitable footwear, maintain a clear route and follow approved manual-handling and cylinder-restraint requirements.
PSC GasGrab™ is a manual handling aid. Do not attach it to cranes, hoists, slings or other rigging equipment, and do not use it to suspend a cylinder overhead.
Key product, size-selection and safe-use information about the PSC GasGrab™.
Access GasGrab technical information or contact PSC to confirm the correct tool size for your cylinder dimensions and handling procedure.
Download the PSC GasGrab™ datasheet for specifications, available sizes, applications and safe-use guidance, or contact PSC for product-selection support.